thg-corporation

parkerstoreparkerstoreparkerstore


  hope-direct

one-click-configurator
 
 
   
 

Reducing Inventory of Hydraulic Hose
Maximizes Profitability and Safety

drew-swanton-parker-store Drew Swanton
Branch Manager

As companies continue to "Lean" out their operations, it has become increasingly important to minimize inventory. While this is a good technique for improving the bottom line, it does have its downsides. When it comes to fabricating hose assemblies, manufacturers and suppliers can’t perfectly predict which parts their customers will need and when. Solutions to this conundrum include methods like custom kitting and vendor managed inventory, both of which streamline the parts ordering process. However, these solutions don’t necessarily address the concerns of companies looking to maximize floor space and profitability in an increasingly challenging global marketplace.

By minimizing the number of parts in your inventory, you also minimize the number of dollars wasted on the parts you don’t use. Primarily developed as a cost-saving measure for its customers, Parker’s GlobalCore solution simplifies your hose inventory. The family of five hydraulic hoses covers diameters ¼” to 2” and working pressure ranges from 3,000 to 6,000 PSI, which—depending on hose diameter and working pressure—are compatible with either 43 Series or 77 Series fittings and exceed ISO 18752 performance specifications.

How Inventory Reduction Can Improve Safety

By reducing the number of parts in your inventory, the potential for errors when matching parts for hose assemblies goes down with it. If your engineering and production staff are not educated on why it’s absolutely critical to use the proper fitting for your hydraulic hose, then the incompatible hose/fitting pairing can leak, fail and even result fail in serious injury or even death.

Is Global Core the Right Solution For My Company?

The cost-savings benefits I mention previously makes it a smart move for many companies. If you are not sure, customer service representatives at The Hope Group’s Parker Store branch locations can help determine if transitioning to Global Core is the right choice for you.

In preparation for our customers making the transition to Parker’s Global Core, all of The Hope Group's Parker Store locations currently stock 797-TC hydraulic hose, which delivers 6,000 PSI constant working pressure. The outside diameter is nearly 30% smaller than SAE spiral and twice the impulse life. It can be purchased at the Parker Store branch location closest to you or ordered online through HopeDirect.com.

387-TC 3,000 PSI Constant Working Pressure
487-TC 4,000 PSI Constant Working Pressure
722-TC 4,000 PSI Constant Working Pressure
787-TC 5,000 PSI Constant Working Pressure
797-TC 6,000 PSI Constant Working Pressure


387-TC Hose - 3,000 PSI

parker-hydraulic-387-tc-hose
  • 1/2 ISO 18752 minimum bend radius
  • 3,000 psi constant working pressure in all sizes
  • Low force to flex for ease of installation
  • Exceeds ISO 18752 performance specification (AC, BC and CC)
  • Synthetic rubber inner tube provides a wider range of fluid compatibility

Click chart to enlarge

387 TC Hose and Fitting Chart

487-TC Hose - 4,000 PSI

parker-hydraulic-487-tc-hose
  • 1/2 ISO 18752 minimum bend radius
  • 4,000 psi constant working pressure in all sizes
  • Low force to flex for ease of installation
  • Exceeds ISO 18752 performance specification (AC, BC and CC)

Click chart to enlarge

387 TC Hose and Fitting Chart

722-TC Hose - 4,000 PSI

parker-hydraulic-722-tc-hose
  • 1/2 ISO 18752 minimum bend radius
  • 4,000 psi constant working pressure in all sizes
  • Exceeds ISO 18752 performance specification (AC, BC and CC)
  • 4-spiral construction for longer life in high-impulse, heavy-duty cycle applications

Click chart to enlarge

722 TC Hose and Fitting Chart

787-TC Hose - 5,000 PSI

parker-hydraulic-787-tc-hose
  • 1/2 the bend radius of SAE spiral
  • 5,000 psi constant working pressure in all sizes
  • Meets ISO 18752 performance specification (BC/DC)
  • Nearly 30% smaller O.D by area than SAE spiral
  • Twice the impulse life - tested to 2,000,000 cycles
  • Flex impulse tested providing a hose superior in both performance and service
  • Less hose weight than SAE spiral

Click chart to enlarge

787 TC Hose and Fitting Chart

797-TC Hose - 6,000 PSI

parker-hydraulic-797-tc-hose
  • 1/2 the bend radius of SAE spiral
  • 6,000 psi constant working pressure in all sizes
  • Meets ISO 18752 performance specification (BC/CC/DC)
  • Nearly 30% smaller O.D by area than SAE spiral
  • Twice the impulse life - tested to 2,000,000 cycles
  • Flex impulse tested providing a hose superior in both performance and service
  • Less hose weight than SAE spiral

Click chart to enlarge

797 TC Hose and Fitting Chart


 





The Parker Store sign is your guarantee of authorized Parker parts and factory-trained technicians ready to solve your immediate hydraulic hose, valve and fitting needs.

ParkerStore Blog

donna-tibbetts One of Our Stores is Open 24 Hours a Day!
Donna Tibbetts
Parker Stores

top

   
  
 
 

The Hope Group, a division of KLX Inc. | 70 Bearfoot Road, Northborough, MA 01532

Phone: 508-393-7660 | Fax: 508-393-8203

Conditions of SaleLegal DisclaimerJobsOur Mission

© 2018, The Hope Group. All rights reserved